pinFind a local distributor

Inset Stove
technical specifications

Compare the table below with the diagram. Other technical specifications may also be found in the installation instructions.

60i

Model 16i 18i 50i 60i 70i 60i Low 70i Low  
Opening required
Width 407 457 547 647 747 647 747 mm
Height 554 554 593 593 593 493 493 mm
Depth 355 355 355 355 355 355 355 mm
Width 16 18 21 ½ 25 ½ 29 ½ 25 ½ 29 ½ in
Height 21 ⅞ 21 ⅞ 23 ⅜ 23 ⅜ 23 ⅜ 19 ⅜ 19 ⅜ in
Depth 14 14 14 14 14 14 14 in
Standard Frame (30 mm all sides)
Width A 450 500 582 682 782 682 782 mm
Height B 576 576 615 615 615 518 518 mm
Return C 12 12 12 12 12 12 12 mm
Width A 17 ¾ 19 ⅝ 22 ⅞ 26 ⅞ 30 ¾ 26 ⅞ 30 ¾ in
Height B 22 ⅝ 22 ⅝ 24 ¼ 24 ¼ 24 ¼ 20 ⅜ 20 ⅜ in
Depth C ½ ½ ½ ½ ½ ½ ½ in
Wide Frame (50 mm top and sides, 30 mm base)
Width A 490 540 622 722 822 722 822 mm
Height B 596 596 635 635 635 538 538 mm
Depth C 12 12 12 12 12 12 12 mm
Width A 19 ¼ 21 ¼ 24 ½ 28 ⅜ 32 ⅜ 28 ⅜ 32 ⅜ in
Height B 23 ½ 23 ½ 25 25 25 21 ⅛ 21 ⅛ in
Depth C ½ ½ ½ ½ ½ ½ ½ in
Outer firebox
Width D 399 449 531 631 731 631 731 mm
Height E 549 549 588 588 588 488 488 mm
Depth F 347 347 347 347 347 347 347 mm
Width D 15 ¾ 17 ¾ 20 ⅞ 24 ⅞ 28 ⅞ 24 ⅞ 28 ⅞ in
Height E 21 ⅝ 21 ⅝ 23 ⅛ 23 ⅛ 23 ⅛ 19 ¼ 19 ¼ in
Depth F 13 ¾ 13 ¾ 13 ¾ 13 ¾ 13 ¾ 13 ¾ 13 ¾ in
Visible glass size
Width 248 298 380 480 580 480 580 mm
Height 356 356 395 395 395 295 295 mm
Area 88.3 106.1 150.1 189.6 229.1 141.6 171.1 cm2
Outputs (Wood)
Total nominal heat output† 3.6 4.9 6.3 7.5 10 6.5 8.5 kW
Net efficiency† 86 85 84 84 77 78 73 %
Room size heated 70 100 130 150 200 130 170 M3
Minimum flue size
Diameter 125 125 125 150 150 150 150 mm
Diameter 5 5 5 6 6 6 6 in
Area 123 123 123 177 177 177 177 cm2
Area 20 20 20 28 28 28 28 in2
Depth to flue G 150 150 150 136.5 136.5 136.5 136.5 mm
Depth to flue G 6 6 6 5 ⅜ 5 ⅜ 5 ⅜ 5 ⅜ in
Chimney height
Above Fire 4.5 4.5 5 5 5 5 5 m
Above Fire 15 15 16 ½ 16 ½ 16 ½ 16 ½ 16 ½ ft
Air supply
Area 0* 0* 10 14 27.5 10 20 cm2
Area 0* 0* 2 2 ½ 4 ½ 2 4 cm2
Smokeless Zone Report
Defra-approval for wood  

† Tested to EN13229: 2001.   The diagram illustration is of the 60i model.
‡ Defra approval pending
* An air supply may be required in homes which have high levels of air-tightness.

Find a local stockist…

E-mail us to find out where they are sold near to you.

Find a local stockist